DrTray is the ultimate tray rack for your hitch. It can easily handle road, mountain, and fat-tire bikes with up to 5” tires. Bike clearance is top notch, with 18” between the trays. To make it even better, the bike tray spacing can be adjusted tool-free while the bikes are loaded, virtually eliminating any issues with bike-to-bike interference. The ergonomic remote tilt lever is intuitive to use and allows quick access to the rear of the vehicle as well as a convenient carrying handle. Its locking SpeedKnob delivers simple and secure vehicle attachment, and exceptional bike theft protection is built in with a burly SKS cable lock system. Plus, DrTray is adaptable – add an EZ+1 to carry a third bike! - Weighs in at only 34 pounds– the lightest rack in its class. (2” receiver Model only) - Securely carries 26” to 29” wheels and tires up to 5” wide - Unrivaled spacing between bikes - up to 18” between each bike - Tool-free adjustment while bikes are loaded minimizes the potential for bike-to-bike interference - Easy-to-use remote tilt lever and lightweight, aluminum design makes raising and lowering the rack a breeze - Tool-free locking SpeedKnob for a secure and easy install to your vehicle - Extra burly SKS cable lock system for each bike secures both wheels and frame - Add the EZ+1 and carry a third bike (2” receiver model only, sold separately) TECHNICAL SPECS - Weight: 34.00 lbs - Dimensions: L 16.00” x W 54.00” x H 11.50”
Yakima's HitchSki is an attachment for your hitch-mounted rack (sold separately) that enables you to carry skis and snowboards. Simply swap the HitchSki for your bike attachment and you now have a rack that can be used year-round. It hauls up to six pairs of skis or four snowboards without the risk of damage thanks to rubber-padded arms. And, Yakima's SKS locks are included to prevent theft.
Fast, secure, and easy to use, the HoldUp EVO is built to handle new bike standards, like fat tires and boost hubs, but it easily carries the classics too. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. Tilt the rack with bikes loaded for quick rear-of-vehicle access using the new easy to reach tilt lever and KickStart foot pedal. The super-simple locking SpeedKnob makes install a tool-free breeze and included SKS bike locks keep your mind at ease. - Hitch mounted tray rack that loads quickly and carries two bikes without frame contact - NEW Easy-access tilt mechanism and KickStart foot pedal make raising and lowering the rack a breeze, even with bikes loaded - NEW Tool-free locking SpeedKnob makes installation and removal fast, easy and secure - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Easily adjust trays to reduce bike-to-bike interference - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, BMX, kids’ bikes, & E-bikes under 50 lbs. - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20-inch to 29-inch wheel sizes and tires up to 5” wide - Integrated SKS (Same Key System) locks included for added bike security - Available in two sizes: 1.25-inch hitch receivers & 2-inch hitch receivers - Carry four bikes – just add the HoldUp EVO +2 (compatible with 2-inch version only)
Transport all types of bikes with Saris’ Freedom 2-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright support. It uses quick-adjust trays and ratcheting straps to secure two bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright support even tilts down to allow trunk access. Plus, the rack itself only weighs 21 pounds, making it easy to take on and off.
Choose your own adventure with the MTR 1-bike hitch rack. Whether you’re feeling me-time or party time, the MTR can adjust for any occasion. The secret is in the MTR’s modular design (after all, MTR stands for “Modular Tray Rack”). Simply add or remove trays to securely haul between one and three bikes to wherever the trail may lead. When you’re ready to hit the road, feel free to take the scenic route. Rugged enough to handle the harshest of environments, the MTR is built with American-made steel and aluminum. Complete with versatile and sleek nesting trays with dual-arm wheel holders, the MTR can carry nearly any rig – from Junior’s MTB to downhill to your favorite eBike – securely, in style and without ever coming into contact with your bike’s frame. The Saris MTR also available in a 2-Bike version. Product Features - Modular: carries 1 bike, up to 60 lbs, and can be customized with Add-On to transport up to three bikes. - Pivot Away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes and never touch the bike's frame. - Full Tilt: tilting feature allows easy hatch access without removing bikes. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Tray-style hitch bike rack. - Carries 1 bike, up to 60 lb. - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed. - Tool-free installation. - Rack weight: 35 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Easily folds up when not in use. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Accommodates wheel bases up to 53 inches. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. - Constructed from American-made aluminum and steel, and tested to outlive the elements.
Whether you’ve invited more friends for an epic ride or can’t decide which rig to take to the trails, the MTR 1-Bike Add-On has you covered. Compatible with both the MTR 1-bike and 2-bike hitch rack, these add-on trays save you the hassle of buying a new rack to haul more bikes. Built with the same robust materials as the MTR rack, these add-on trays are ready to roll out of the box and are the soul of the Modular Tray Rack (MTR) functionality. Product Features - Bike tray add-on for MTR 1-bike or 2-bike tray-style hitch rack. - Built with American-made aluminum and steel. - Nesting wheel trays speed up bike loading and unloading process. - Wheel trays and dual-arm wheel holders securely transport variety of bikes. - Hauls bikes up to 60 lb if used as first two trays closest to vehicle; or up to 35 lb if used as third or fourth tray. - Bike tray add-on for the MTR platform hitch rack. Compatible with both the 1-bike and 2-bike base. - Carries 1 bike, up to 60 lb when used in the first two positions closest to the vehicle. When used in positions furthest from the vehicle, tray can hold a bike up to 35 lb. - Minimal assembly required. - Rack weight: 30 lb. - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Integrated locking cable secures bikes to the rack. - Hitch compatibility will depend on MTR base unit. - Built and tested to outlive the elements.
The only thing left to do is answer. No matter where the call beckons, the MTR can get you and your ride there. Designed with versatility at its core, the MTR (aka: modular tray rack) can transport a variety of bikes and can be easily customizable with add-on trays to bring your whole collection of shredders or ride-share with friends. Each MTR rack is built from American-made steel and aluminum for maximum durability. Roomy wheel trays swallow bike tires up to 5 inches wide for a stable hold, while dual-arm wheel holders keep bikes locked in position – and keep the paint chip-free. It’s all built on a rugged hitch-based foundation that can be tilted away, when fully loaded with bikes and without, for fast and easy vehicle access – because after all, those snacks aren’t going to pass themselves. Plus, the MTR’s nesting bike trays make for easy-on, easy-off loading. No more lifting bikes over the rack – simply flip the trays out of the way as needed to get you from parking lot to trailhead in record time. The Saris MTR also available in a 1-Bike version. Product Features - Modular: carries 2 bikes, up to 60 lbs, and can be customized with Add-On to transport up to four bikes. - Pivot away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes, and never touch the bike's frame. - Full Tilt: tilting mechanism for easy hatch access. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Designed to be used with 2" hitch receivers only. - Tray-style hitch bike rack - Carries 2 bikes, up to 60 lb. each - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed - Rack folds up for compact storage when not in use. - Tool-free installation - Rack weight: 55 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches - Integrated locking cable secures bikes to the rack - Locking hitch pin secures rack to the car - Accommodates wheel bases up to 53 inches - 2" hitch compatible - Constructed from American-made aluminum and steel, and tested to outlive the elements
Customize Your Hauling Capacity No ride or trail is exactly alike – so why is your rack setup the same no matter what? Put the MTR’s “modular” moniker to use with the 2-bike Add-On. The 2-bike Add-On is made from the same rugged, American-made aluminum and steel, which are tested to outlive the elements. It’s compatible with both 1-bike and 2-bike models and lets you haul more bikes to fit the day’s adventure – and maybe bring some friends along for the ride. Product Features - Bike tray add-on for MTR 1-bike or 2-bike tray-style hitch rack. - Built with American-made aluminum and steel. - Nesting wheel trays speed up bike loading and unloading process. - Wheel trays and dual-arm wheel holders securely transport variety of bikes. - Hauls bikes up to 60 lb if used as first two trays closest to vehicle; or up to 35 lb if used as third or fourth tray. - Bike tray add-on for the MTR platform hitch rack. Compatible with both the 1-bike and 2-bike base. - Carries 2 bikes, up to 60 lb each when used in the first two positions closest to the vehicle. When used in positions furthest from the vehicle, trays can hold bikes up to 35 lb. - Minimal assembly required. - Rack weight: 50 lb. - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Integrated locking cable secures bikes to the rack. - Hitch compatibility will depend on MTR base unit. - Built and tested to outlive the elements.
This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.
This is perfect for the commuter or rider who only needs to carry one bike. It is light at 25lbs, compact, easy to store & easy to use. RockyMounts includes both 1.25" and 2" components in the box, so it will work with either hitch receiver sizes, as well as their anti-wobble locking hitch bolt to keep the rack both tight and secure. The rack includes locks for locking the rack to the car and the bike to the rack with the convenience of one key. It folds flat against the car with a quick release handle and the bike easily loads with our platform wheel trays and ratcheting arms. If you do need to carry a second bike down the road, RockyMounts' MonoRail Add-on can be installed by removing the end cap and attaching with two bolts. It is simple to go back and forth between 1 & 2 bike configurations. Carries kids bike with 20" wheels up to adult 29" wheels up to 48" wheelbase. Carries Fat Bikes up to 5" tires providing enough clearance for RockShox Blutos & the new 197mm rear axles.
For around-town jaunts and cross-country excursions, Hollywood's Road Runner 3 is a great solution for carrying three bikes. Hollywood's rubber separators with integrated straps and a lower tie-down bar hold the bikes fast and ensure they won't bump each other. And, even when loaded, this rack easily tilts out of the way for rear access, and it folds down when not in use. Plus, Hollywood's No-Wobble system eliminates slack between the hitch and rack for extra stability. The Road Runner 3 also includes a keyed-alike locking hitch pin and 8-foot locking cable for total security and convenience. • Weight: 31 lbs • Max weight capacity: 35 lbs per bike • Not to be used on any trailer, fifth wheel, or towed vehicle
Transport your recumbents and save your back, too, with Hollywood's Sport Rider Recumbent rack that carries up to 2 'bents. Simply set your recumbent into the wheel holders (that are nice and low for easy mounting), then slide the padded universal clamp over the frames to secure them in place. This great rack fits recumbents with up to 74-inch wheelbases and includes small wheel adapters and extra tie downs to keep your rig in place. And, the Sport Rider folds up when not in use for easy storage and transportation. - Hitch Size: fits both 1 ¼ and 2-inch - Space between bikes: 18-inches - Not to be used on any trailer, fifth wheel or towed vehicle - Max weight capacity: 45 lbs per bike
Page 1 of 1